涂料工业 ›› 2009, Vol. 39 ›› Issue (4): 26-27.

• • 上一篇    下一篇

新型环氧胶泥的研制

金加洪1,张秀芹1,杨永兵1,陆振方2,王素琴2   

  1. 1、常州南京大学高新技术研究院,江苏常州 213000;2、常州市天安特种涂料有限公司,江苏常州 213000
  • 出版日期:2009-04-01 发布日期:2019-05-31
  • 作者简介:金加洪(1974—),男,工程师,从事有机功能材料、特种涂料等研究。

Development and Application of Novel Epoxy Putty

Jin Jiahong1, Zhang Xiugin1, Yang Yongbing1, Lu Zhefang2,wang suqin2   

  1. 1.changzhou high Technology Research Institute of Nanjing University, Changzhou, Jiangsu 213000, China;2.changzhou tianan special coating co.ltd,changzhou,jiangsu 21300,china
  • Online:2009-04-01 Published:2019-05-31

摘要: 以多异氰酸酯改性的环氧树脂与混合胺制备了新型环氧胶泥,此胶泥既具有常规环氧胶泥的防腐性、耐 化学品性以及优异的附着力,又具有厚填充时良好的拉伸性能,扯断伸长率达到 8%以上。

关键词: 改性环氧树脂 , 环氧胶泥 , 扯断伸长率 , 拉开法附着力 , 拉伸强度

Abstract: A novel epoxy putty was prepared through polyurethane modified epoxy resin and mixed a-mines. It was found that the putty, besides its usual good corrosion resistance, chemical resistance and adhe-sion, has good tensile performance, the yield elongation was over 8%.

Key words: modified epoxy resin, epoxy putty, yield elongation, pull off adhesion, tensile strength