Paint & Coatings Industry ›› 2008, Vol. 38 ›› Issue (10): 23-25.

Previous Articles     Next Articles

Study on UV-Curing High Performance Celulose Ester Coatings

Tan Zhuohua,Liang Liang,Chen Nengchang   

  1. Faculty of Chemical Technology and Light Industry,Guangdong University of Technology,Guangzhou 510006,China
  • Online:2008-10-01 Published:2019-05-31

紫外光固化高性能纤维素酯涂层的研究

谭卓华,梁 亮,陈能昌   

  1. 广东工业大学轻工化工学院,广州 510006

Abstract: Celulose acetate butyrate (CAB) was grafted with anhydride,which was used to prepare the UV-curable modified celulose ester resin.The efects of active monomers and photoinitiators on the proper-ties of modified CAB were discused.Coating performance on diferent substrates were also studied.The sol-vent resistance and scratch resistance of the modified CAB were significantly improved.The hardnes could reach4H,the gloss (60°) 130,and the acetone rub test were over 400 times.

Key words: Celulose acetate butyrate, anhydride, UV-curing, solvent resistance, scratch resistance

摘要: 通过对醋酸丁酸纤维素(CAB)进行酸酐接枝改性,合成了可紫外光固化的改性纤维素酯树脂。讨论了活 性稀释剂、光引发剂的选用对改性后醋酸丁酸纤维素性能的影响,并研究了不同材质表面的涂膜性能。改性的醋酸丁 酸纤维素涂层在耐溶剂性、耐划伤性方面得到显著提高,其硬度可达 4H,光泽(60°)为 130,耐丙酮擦拭40次以上。

关键词: 醋酸丁酸纤维素 , 酸酐 , UV固化 , 耐溶剂性 , 耐划伤性