Paint & Coatings Industry ›› 2018, Vol. 48 ›› Issue (2): 43-49. doi: 10.12020/j.issn.0253-4312.2018.2.43

• HSE • Previous Articles     Next Articles

Preparation and Properties of Bio-Based Thiol-Ene UV Curing Coating

Hu Yunyong1,2,Fu Changqing1,2,Shen Liang1,2,*   

  1. 1. Department of Polymer and Coating, Jiangxi Science & Technology Normal University, Nanchang 330013,China;
    2. Jiangxi Engineering Laboratory of Waterborne Coating, Nanchang 330013,China
  • Received:2017-12-15 Online:2018-02-02 Published:2018-09-18
  • Contact: Liang Shen

生物基巯基-烯UV固化涂膜的制备及性能研究

胡云勇1,2,付长清1,2,申亮1,2,*   

  1. 1. 江西科技师范大学化学化工学院涂料与高分子系,南昌 330013
    2. 江西省水性涂料工程实验室,南昌 330013
  • 通讯作者: 申亮
  • 基金资助:
    国家自然科学基金(51563011);江西省自然科学基金(2016BAB203094);江西省教育厅科研项目(GJJ160775);江西科技师范大学校拔尖人才项目(2016QNBJRC007);江西科技师范大学研究生创新专项资金项目资助(YC2016-X04)

Abstract:

A series of UV curable monomers (GAM, SOM and COT) were prepared by simple green process using gallic acid, epoxidized soybean oil and castor oil as raw materials. Those monomers were then used to prepare a series UV curing coating via thiol-ene UV curing process. The structure of the monomers and the properties of films were characterized by nuclear magnetic resonance (NMR), thermogravimetric analyzer (TGA), differential scanning calorimetry (DSC) and dynamic mechanical analyzer (DMA). The effect of different monomer content on coating mechanical properties and thermal properties was studied. The results showed that the pencil hardness and glass transition temperature of the UV curing coating had been improved with the increase of the content of GAM, and all of the bio-based coating had good thermal stability.

Key words: gallic acid, epoxidized soybean oil, castor oil, thiol-ene, UV curing coating

摘要:

以没食子酸、环氧大豆油和蓖麻油为原料,通过简单绿色的工艺制备了一系列可UV固化活性单体(GAM、SOM、COT), 并将所制备的单体进行巯基-烯UV固化,制得一系列可再生碳含量较高的UV固化涂膜。通过核磁( 1H NMR)、热重分析仪(TGA)、差示扫描量热仪(DSC)、动态机械分析仪(DMA)对单体结构和膜的性能进行了表征分析,并研究了不同单体含量对涂膜机械性能、玻璃化转变温度(Tg)以及热性能的影响。结果表明:随着没食子酸基单体含量增加,UV固化涂膜的铅笔硬度和Tg有所提升,涂膜整体具有较好的热稳定性。

关键词: 没食子酸, 环氧大豆油, 蓖麻油, 巯基-烯, UV固化涂层

CLC Number: