摘要： 根据水性中涂的材料特点，经过大量的试验、分析，发现了水性中涂烘干室升温段时间与外观短波值之间的关系，对采用水性中涂车厂烘干室的规划、设计提供了思路。
关键词:
烘干室,
升温段,
设计
Abstract: According the material characteristics of the waterborne surfacer primer, the relation between the time in temperature high -up section waterborne surfacer primer baking oven and short wave of the surface performance was discovered. For tabling a valuabe proposal when the same waterborne surfacer primer oven design is planned in the future.
Key words:
oven,
lemperature high-up section,
design
武向军. 水性中涂烘干室设计的工艺性研究[J]. 涂料工业, 2010, 40(6): 55-56.
Wu Xiangjun. Study on the Design of Waterborne Surfacer Primer Baking Oven[J]. Paint & Coatings Industry, 2010, 40(6): 55-56.