涂料工业 ›› 2010, Vol. 40 ›› Issue (12): 13-16.

• 探索开发 • 上一篇    下一篇

甲醛改性双氰胺水性环氧树脂潜伏性固化剂的研制

周建萍1,曾庆煜1,曹万荣2,狄宁宇2   

  1. 1. 南昌航空大学材料学院高分子材料与工程系,南昌 330063;2. 浙江荣泰科技企业有限公司,浙江嘉兴 314007
  • 出版日期:2010-12-01 发布日期:2019-05-25
  • 作者简介:周建萍(1971-),女,博士,副教授,主要从事功能材料的研究。
  • 基金资助:
    嘉兴市科技局资助项目(2008AZ1013)

Preparation of Latent Curing Agents for Waterborne Epoxy via Modification of Dicyandiamide with Formaldehyde

Zhou Jianping1,Zeng Qingyu1,Cao Wanrong2,Di Ningyu2   

  1. 1.School ofmaterial Science and Engineering, Nanchang Hangkong University, Nanchang 330063, China; 2.Zhejiang Rongtai Technical Industry Co., Ltd., Jiaxing, Zhejiang 314007, China
  • Online:2010-12-01 Published:2019-05-25

摘要: 合成了一种新型的甲醛改性双氰胺水性环氧树脂潜伏性固化剂,对反应条件进行了优化,采用差热分析(DTA)研究了其固化E-51环氧树脂的固化性能,并对其配制的水性环氧涂料的漆膜性能进行了研究。研究结果表明:改性双氰胺固化环氧树脂的固化温度为138℃;其配制的单组分水性环氧涂料乳液稳定性好,以3 000 r/min离心30 min不分层,乳液粒径为0.36μm,室温有4个月的贮存期,该水性涂料漆膜性能优良。

关键词: 水性环氧树脂, 潜伏性固化剂, 双氰胺, 改性, 贮存期

Abstract: A kind of latent curing agent for waterbome epoxy was synthesized by modifying dicyandiamide with formaldehyde. The modification conditions were optimized and the curing properties of the products were characterized by DTA. A single-component waterbome epoxy emulsion was prepared and the basic properties of its cured film were studied. Results showed that the curing temperature is 138 ℃ when epoxy resin was cured with the synthesized latent curing agent. The particle size of the waterbased epoxy resin emulsion is about 0. 36 μm and will not be separated at 3 000 r/min centrifugation for 30 min and has a storage period up to 4 months at ambient temperature. Its cured paints have good film properties.

Key words: waterborne epoxy resin, latent curing agent, dicyandiamide, modification, storage period