摘要： 介绍了航空发动机铜合金与镁合金零件表面耐高温干膜润滑涂层化学去除剂的配制方法。通过工艺实 验优化各成分的参数，重点检测了化学去除剂对基体材料的腐蚀情况，模拟了零件中铜合金与镁合金之间形成的缝隙 并开展缝隙腐蚀试验。结果表明，该化学去除剂能很好地满足此类型航空附件零件表面涂层去除的要求。
关键词:
化学去除剂 ,
航空发动机 ,
缓蚀剂 ,
防变色剂
Abstract: This article has described the preparation of chemical remover for high temperature resistant dry lubricoate coat on copper alloy and magnesium alloy acces sory of aeroengine.The parameter of chemical remover is optimized.The corosion of chemical remover to body is examined.The aperture betwen coper and magnesium was simulated and aperture corosion test was conducted.The result indicates that the chemi- cal remover could satisfy the requirement of removing the lubricate film.
Key words:
Chemical remover,
aeroengine,
inhibitor,
color change defender
黄选民, 江海英, 幸泽宽, 韩国忠, 段 睿. 铜合金与镁合金表面干膜润滑涂层去除剂的研究[J]. 涂料工业, 2008, 38(10): 56-59.
Huang Xuanmin, Jiang Haiying, Xin Zekuan, Han Guozhong, Duan Rui. Study on Removing of Dry Lubricate Coatings Film on Copper Aloy and Magnesium Alloy Surface[J]. Paint & Coatings Industry, 2008, 38(10): 56-59.