The Progress in Wastewater Treatment Technology in Automobile Painting Process

doi:10.12020/j.issn.0253-4312.2020.8.64

Abstract

Abstract: A large quantity of wastewater is produced in the automobile painting process， mainly including wastewater from degreasing，phosphating，electrophoresis，and spraying processes，etc. It is a complex and difficult type of industrial effluent with high concentration of various pollutants，such as heavy metal ions，surfactants，paint particles，phosphates，etc. According to the different pollutants contained in the wastewater，proper pretreatment of the wastewater through various processes to effectively remove pollutants such as phosphate，heavy
metal ions，suspended solids and oils is beneficial to reduce the pollutant loading and increase effectiveness of subsequent biological and further treatment processes unit. This paper reviewed the practices and research development of wastewater treatment technology in automotive painting industry in recent years. It was expected to summarize the advantages and disadvantages of pretreatment processes and main treatment processes，providing some useful guide for the reuse and recycling and compliant discharge in automotive painting industry for their wastewater treatment.

Key words: automobile coating wastewater, pretreatment process, main treatment process, wastewater reuse

摘要： 汽车涂装中产生大量的工业废水，主要包括脱脂废水、磷化废水、电泳废水和喷漆废水等,其典型污染物为重金属离子、表面活性剂、油漆颗粒、磷酸盐等，是一类复杂及难处理的高浓度工业废水。依据废水中所含污染物的不同，对涂装各工序废水进行分质预处理可有效地去除磷酸盐、重金属离子、悬浮固体、油类物质等污染物，有利于减轻后续生物或高级处理单元的负荷，提高整个处理系统的效率。本文综述近年来汽车涂装废水处理方面的研究成果或实践，旨在总结预处理工艺及主体处理工艺的优点及存在的不足，希望为汽车涂装废水处理达标排放及循环回用提供一些借鉴。

关键词: 涂装废水, 预处理工艺, 主体处理工艺, 废水回用

CLC Number:

X703

Wang Xuening, Yang jingjing, Zhou Xiaoji, Bai Renbi,. The Progress in Wastewater Treatment Technology in Automobile Painting Process[J]. Paint & Coatings Industry, 2020, 50(8): 64-70.

王雪宁, 杨晶晶, 周晓吉, 白仁碧,. 汽车涂装废水处理技术的研究进展[J]. 涂料工业, 2020, 50(8): 64-70.

/ / Recommend / Download Citations

URL: https://www.cn-pci.com/EN/10.12020/j.issn.0253-4312.2020.8.64

https://www.cn-pci.com/EN/Y2020/V50/I8/64

References

[1].2019年 12月与 11月相比汽车产销延续了增长态势[J].[J].汽车与安全, 2020, (1):108-
[2]王锡春，李文刚.再谈“绿色涂装”—汽车“绿色涂装与涂料”的发展趋势三[J].中国涂料, 2014, 29(10):17-21
[3]段晶晶，吴立辉，杨奕.汽车涂装废水水质特征分析及处理工艺[J].中国环保产业, 2011, (2):51-54
[4]张向和，彭绪亚，刘峰.厌氧 -好氧接触氧化处理汽车脱脂废水研究[J].环境工程学报, 2010, 4(5):1125-1128
[5]杨晓伟，代青华，汪洋，等.浅谈汽车涂装废水的处理工艺[J].能源与环境, 2016, (4):79-82
[6]蔡开建，陈文峰，陈斌.汽车厂涂装喷漆循环水处理技术的应用现状及发展趋势[J].工业水处理, 2010, 30(3):4-8
[7]周德坤.汽车涂装废水处理工艺改进综述[J].广州化工, 2011, 39(7):32-35
[8]屈勇军，李亮，徐浩宇，等.汽车装配车间生产废水处理工程实例[J].中国给水排水, 2017, 33(8):125-128
[9]彭皓 .有机 /无机高分子絮凝剂在某汽车厂涂装废水处理中的应用 [D].重庆：重庆大学， 2007.
[10]杨德敏，夏宏，程方平，等.预处理气浮水解酸化接触氧化处理汽车生产废水[J].中国给水排水, 2013, 29(8):74-80
[11]陈广垠，章军.膜分离技术在汽车涂装工业中的应用[J].现代涂料与涂装, 2014, 17(9):42-45
[12]肖武，高培，姜晓滨，等.双膜组件及耦合工艺的研究与应用进展[J].化工进展, 2019, 38(1):136-144
[13]文会超，舒莉，邢卫红，等 .第二届全国膜技术在冶金中应用研讨会论文集 [C].南京：南京工业大学， 2006： 120-124.
[14]ABU BAKAR A F，BARKAWI S N M，HANAFIAH M M.Heavy Metals Removal from Automotive Wastewater usingChemically Modified Sand[J].Sains Malaysiana, 2016, 45(10):1509-1516
[15]石艳利，李振雨.离子交换树脂处理重金属废水的研究进展[J].广东化工, 2015, 42(14):107-111
[16]SENGORUR B，OGLENI O，OGLENI N.Removal of copperand zinc from automotive wasterwater by purolite C-104 ionexchange resin[J].Fresenius Environmental Bulletin, 2006, (15):182-185
[17]贺国旭，张秋霞，杨维春.电浮选方法在废水处理中的应用[J].净水技术, 2010, 29(5):36-41
[18]MOHTASHAMI R，SHANG J Q，XU Y Q.Treatment ofautomotive paint wastewater using electroflotation：Kinetic study，Influencing factors and data analysis[J].EnvironmentalProcesses, 2018, 5(3):577-591
[19]张进，董强，刘杏芹，等 .第一届全国化学工程与生物化工年会论文集 [C].北京：中国华工学会， 2004：439-445.
[20]陈烨，董菲菲，陆骏，等.混凝芬顿法处理汽车涂装有机废水[J].材料保护, 2018, 51(9):126-129
[21]严凯，孔祥成，张勇，等.分质混凝 -水解酸化 -工艺处理涂装废水[J].水处理技术, 2014, 40(4):129-131
[22]MACKUL’AK T，BODIK I，SMOLINSKA M，et al.Automotive industry wastewater treatment by mixture ofenzymes[J].Monatshefte für Chemie, 2016, 147(1):1-6
[23]周振，姚吉伦，庞治邦，等.电絮凝技术在水处理中的研究进展综述[J].净水技术, 2015, 34(5):9-15
[24]MERCADO MARTINEZ I D，GONZALEZ SILVA G， VALENCIA HURTADO S H. Removal of nickel and COD present in wastewaters from automotive industry by electrocoagulation[J].[J].Revista EIA, 2013, 19:13-21
[25]GILPAVAS E，MOLINA-TIRADO K，ANGEL GOMEZ-GARCIA M.treatment of automotive industry oily wastewaterby electrocoagulation：statistical optimization of the operationalparameters[J].Water Science and Technology, 2009, 60(10):2581-2588
[26]马栋，高海军，赵永欢.利用电絮凝技术处理汽车涂装废水[J].电镀与涂饰, 2018, 37(2):83-87
[27]张静，谢昭明.三维电极在废水处理中的应用研究[J].工业用水与废水, 2013, 44(1):5-8
[28]黄中悬，徐敏峰.水解酸化预处理汽车涂装废水的效能分析[J].安徽建筑大学学报, 2019, 27(3):63-66
[29]夏晴 .处理汽车涂装废水的好氧颗粒污泥快速培养及吸附有机物特性研究 [D].合肥：安徽建筑大学， 2018.
[30]杨丹丹 .好氧颗粒污泥对汽车涂装废水的处理效能及其微生物菌群结构分析 [D].合肥：安徽建筑大学， 2018.
[31]朱乐辉，付朝臣.曝气生物滤池工艺处理汽车涂装废水[J].环境工程, 2006, (1):76-78
[32]刘绍根，孙菁，成雄剑，等.反应器中好氧颗粒污泥处理汽车涂装废水[J].化工进展, 2012, 31(5):1160-1164
[33]任祎博 .好氧颗粒污泥的培养及其在汽车涂装废水中的试验研究 [D].合肥：安徽建筑工业学院， 2011.
[34]ZHUYF，ZHU T.Multi-level contact oxidation processperformance when treating automobile painting wastewater： pollutant removal efficiency and microbial community structures[J].Water, 2017, 9(11):2-14
[35]SALEHI MOAYED M，MIRBAGHERI S A.Determination of kinetic constants and biological treatment of automobileindustries wastewater[J].International Journal of EnvironmentalResearch, 2010, 4(1):131-136
[36]蒋宏国，罗琳，朱凌峰.汽车涂装废水处理工程的研究[J].水处理技术, 2009, 35(7):113-115
[37]闫世超，樊向羽.一种生化与物化相结合的涂装废水处理工艺[J].现代涂料与涂装, 2018, 21(1):46-50
[38]CONSEJO C，ORMAD M P，SARASA J，et al.Treatment of wastewater coming from painting processes：application of conventional and advanced oxidation technolo-gies[J].Ozone Science & Engineering, 2005, 27(4):279-286
[39]刘海宁，马安明.氧化技术在难降解工业废水中的应用[J].中国资源综合利用, 2018, 36(3):93-95
[40]王小晓，刘志梅，雷阳明，等.混凝法应急处理汽车涂装废水的研究[J].环境工程, 2013, 31(S1):147-150
[41]郭北洋.汽车涂装废水处理与循环利用实践[J].现代涂料与涂装, 2015, 18(1):57-60
[42]郑一鸣.汽车涂装废水反渗透膜浓缩“零排放”技术实践[J].水处理技术, 2017, 43(11):129-132
[43]AGANA B，REEVE D，ORBELL J D.Industrial water reclamation using polymeric membranes-case studies involving a car manufacturer and a beverage producerr[J].Journal of Water Reuse and Desalination, 2013, 3(4):357-372
[44]高海军，马栋，刘铁锁，等.汽车涂装车间喷涂废水回用处理方案研究[J].现代涂料与涂装, 2018, 21(9):51-54
[45]金可勇，胡鉴耿，金水玉，等.中水回用浓水的零排放工艺比较及优化研究[J].水处理技术, 2015, 40(1):103-106

Please choose a citation manager

Content to export