Paint & Coatings Industry ›› 2015, Vol. 45 ›› Issue (1): 17-20.

Previous Articles     Next Articles

Research on Anticorrosive Performance of Graphene/Epoxy Composite Conductive Coatings

Huang Kun1, Zeng xjanguang2, Pei Songfeng1, Zhang Jingyu 2,3, Shi Chao1   

  1. 1. Advanced Carbon Division Institute of Metal Research Chinese Academy of Science, Shenyang 110016, China; 2 Institute of Material and Chemical Engineering Sichuan University of Science and EngineeringZigong,Sichuan 643000, China; 3. Material Corrasion and Protection Key Laboratory of Sichuan Prorince, Zigong, Sichuang 643000,China
  • Online:2015-01-31 Published:2019-05-31

石墨烯 / 环氧复合导电涂层的防腐性能研究

黄 坤1,曾宪光2,3, 裴嵩峰1,张敬雨2,3,石 超1   

  1. 1、中国科学院金属研究所先进炭材料研究部,沈阳 110016; 2、四川理工学院材料与化学 工程学院,四川自贡 643000; 3、 材料腐蚀与防护四川省重点实验室,四川自贡 643000
  • 作者简介:黄坤( 1982—) ,男,助理研究员,研究方向为石墨烯制备与应用研究等。
  • 基金资助:
    材料腐蚀与防护四川省重点实验室开放基金(项目编号:2012CL11)

Abstract: Conductive anticorrosive coatings using graphene as fillers in epoxy resin(E- 44) are prepared. The performance of graphene/ epoxy coatings is compared with pure epoxy coatings, carbon black/epoxy coating, commercial zinc-rich epoxy coatings and glass flake/ epoxy coatings. The results reveal that a low addition of 0. 5%o graphene can improve the anticorrosion performance of epoxy coatings and the ad dition of 1% graphene can enable the coating to show good an ticorrosive and conductive performance, with its surface resistance approx, 106 Ω, which can meet the requirement of antistatic coatings.

Key words: graphene, epoxy, antistatic, anticorrosion

摘要: 以石墨烯粉体为填料,环氧 E-44 为基料研制了一种环氧复合防腐导电涂料,对比了不同 石墨烯含量的复合涂料与纯环氧涂料、炭黑环氧涂料、环氧富锌涂料、玻璃鳞片涂料的导电和防腐等 方面的性能。 结果表明:石墨烯用量为 0.5%时,涂层防腐性能优良,用量为 1%时,涂层表面电阻率为 106 Ω,符合导静电要求。

关键词: 石墨烯, 环氧, 导静电, 防腐