Paint & Coatings Industry ›› 2018, Vol. 48 ›› Issue (2): 25-29. doi: 10.12020/j.issn.0253-4312.2018.2.25

• Technology • Previous Articles     Next Articles

Preparation and Properties of PANI-DBSA/EA/PU Interpenetrating Networks of Conductive Films

Zheng Xin1,Mu Zhang1,Tan Xiaoming2   

  1. 1. Department of Geophysical and Geochemical Exploration, Bureau of Geology and Mineral Exploration and Development of Xinjiang Uygur Autonomous Region, Changji , Xinjiang 831100,China
    2. Jingchu University of Technology, Jingmen, Hubei 448000, China
  • Received:2017-12-01 Online:2018-02-02 Published:2018-09-18

纳米PANI-DBSA/EA/PU互穿网络导电膜的制备及其性能

郑鑫1,母章1,谭晓明2   

  1. 1. 新疆维吾尔自治区地质矿产勘查开发局地球物理化学探矿大队,新疆昌吉 831100
    2. 荆楚理工学院,湖北荆门 448000
  • 作者简介:郑鑫(1986—),工程师,主要从事功能高分子材料研究。

Abstract:

The PANI-DBSA is synthesized by doped reaction of aniline and dodecylbenzenesulfonic acid (DBSA) in epoxy acrylic resin by in-situ emulsion polymerization. PANI-DBSA/EA polymer blends had been mixed with castor oil polyurethane (PU) prepolymer, crosslinking agent (e.g., styrene and acrylonitrile) at the presence of benzoyl peroxide (BPO) as initiator to form the conductive nano-PANI-DBSA/EA/PU interpenetrating networks composite film. By determining the conductivity and tensile strength, the influence of PANI-DBSA content, crosslinking agent, coupling agent and the type and amount of BPO concentration on the conductivity and mechanical properties of the composite film had been studied. The results showed that the composite film exhibited its electrical conductivity up to 2×10 -5 S/m and tensile strength 15.8 MPa when it comprised PANI-DBSA 12.5%, KH-550 3%、BPO 0.4% and styrene 60%.

Key words: nano-PANI-DBSA, polyurethane prepolymers, composite films, conductivity, mechanical property

摘要:

用原位乳液聚合法在环氧丙烯酸树脂(EA)中合成了十二烷基苯磺酸掺杂的纳米聚苯胺(PNAI-DBSA),纳米PNAI-DBSA/EA混合物与蓖麻油聚氨酯(PU)预聚体、交联剂(苯乙烯、丙烯腈)等混合后,在引发剂过氧化苯甲酰(BPO)的作用下形成了纳米PANI-DBSA/EA/PU互穿网络导电复合膜。通过测定电导率和拉伸强度,研究了PANI-DBSA含量、交联剂及偶联剂的种类和用量以及BPO用量对复合膜导电和力学性能的影响。结果表明:在PANI-DBSA含量为12.5%、苯乙烯含量为60%、KH-550用量为3%、BPO用量为0.4%时,复合膜的电导率达2×10 -5 S/m,拉伸强度为15.8 MPa。

关键词: 纳米聚苯胺, 聚氨酯预聚体, 复合膜, 导电性能, 力学性能

CLC Number: