Paint & Coatings Industry ›› 2023, Vol. 53 ›› Issue (6): 30-38. doi: 10.12020/j.issn.0253-4312.2022-294

• Technology • Previous Articles     Next Articles

Research on the Preparation of Epoxy Phosphate Ester Resins and Their Application in the Field of Metal Corrosion Protection

Zhao Ning1,Hu Zhenwen1,Chen Yujian1,Zhang Jian1,Xu Linxiang1,Ma Yong2,Chen Yong2,Li Weili1   

  1. 1. School of Materials Science and Engineering,Jiangsu University of Science and Technology,Zhenjiang,Jiangsu 212003,China; 2. Nantong Tianhe Resin Co., Ltd., Nantong,Jiangsu 226017,China
  • Online:2023-06-01 Published:2023-06-05

环氧磷酸酯的制备及其在金属防护领域的应用研究

赵宁1,胡振文1,陈于健1,张健1,许令详1,马勇2,陈勇2,李为立*1   

  1. 1. 江苏科技大学材料科学与工程学院,江苏镇江212003;
    2. 南通天和树脂有限公司,江苏南通226017
  • 作者简介:李为立(1979—),博士,教授,从事功能性防腐树脂的研究。
  • 基金资助:
    江苏科技大学本科创新计划(2023年度)

Abstract:

In this paper,the epoxy phosphate ester resin(EPER) was obtained bycovalent bond grafting of diethyl phosphate(DPA)and epoxy resins,which was used as the matrix resin to prepare the cured varnish coating. The composition,construction,glass transition temperature of EPER,and the interior morphology,mechanical properties,and anti-corrosion properties of cured coating were characterized by FT-IR, 1H NMR,XPS,DSC,SEM,and EIS. The DPA content and epoxy value on the intrinsic properties of the cured coatingwere studied systematically. The results showed that the modified EDPA increased themechanical properties of the cured coating on one hand,and on the other hand enhanced the corrosion resistance of the cured coating due to the chelation of phosphate and metallic ions, which made it possible to be applied in the field of metal protection.

Key words: epoxy phosphate ester resins;chemical modification;mechanical property;corrosion resistance 

摘要: 通过共价键的连接,将磷酸二乙酯(DPA)与环氧树脂(EPR)反应以制备环氧磷酸酯,并将环氧磷酸酯作为基体树脂制备了清漆固化涂层。利用傅立叶变换红外光谱(FT-IR)、核磁共振氢谱(1H NMR)、X射线光电子能谱(XPS)、差示扫描量热仪(DSC)、扫描电子显微镜(SEM)及电化学交流阻抗(EIS)等,对环氧磷酸酯的组成、结构、玻璃化转变温度,以及固化涂层的内部形貌、力学性能和耐腐蚀性进行了研究。重点分析了 DPA的添加量以及不同环氧值的 EPR对环氧磷酸酯本征性质的影响。结果表明:相对于纯环氧树脂,经改性的环氧磷酸酯一方面提高了固化清漆涂层的力学性能,另一方面磷酸根离子对金属离子的螯合作用,可更加有效提高固化涂层的耐腐蚀性,为其在金属防腐领域的应用提供了可行性。

关键词: 环氧磷酸酯, 化学改性, 力学性能, 腐蚀防护

CLC Number: