涂料工业 ›› 2017, Vol. 47 ›› Issue (6): 1-6.

• 探索开发 •    下一篇

一种含氟可聚合光引发剂的合成及光聚合性能研究

张 娜1,2,王 磊1,2,聂 俊,杨金梁   

  1. 1、北京化工大学常州先进材料研究院,江苏常州 213000;2、北京化工大学材料科学与工程学院,北京 100029;3、北京化工大学理学院,北京 100029
  • 出版日期:2017-06-01 发布日期:2019-05-31

Synthesis and Photopolymerization Properties of Polymeric Photoinitiator Containing Fluorine

Zhang Na 1,2, Wang Lei1,2, Nie Jun3, Yang Jinliang1   

  1. 1. Changzhou Institute of Advanced Materials Research, Beijing University of Chemical Technology, Chang zhou, Jiangsu 213000 China;2. School of Materials Science and Engineering, Beying University of Chemical Technology, Beijing 100029, China;3. School of Science, Beijing University of Chemical Technology, Beijing 100029, China
  • Online:2017-06-01 Published:2019-05-31

摘要: 以 4-氟-4′-羟基二苯甲酮和丙烯酰氯为原料,采用酰基化反应合成了一种含氟可聚合二苯甲酮类光引发剂(FBPAc)。 通过紫外光谱研究了 FBPAc 的吸收、降解以及迁移性能,并利用实时红外(RT-IR)研究了 FBPAc 的光聚合动力学行为。 结果表明:FBPAc 的最大吸收峰在 256.2 nm处,与二苯甲酮(BP)最大吸收峰(251.0 nm)相比略微红移;FBPAc 的相对迁移率仅为 BP 的 15%。

关键词: 光聚合, 含氟光引发剂, 可聚合, 低迁移

Abstract: A polymeric photoinitiator containing fluorine (FBPAc)was prepared by using 4-fluorophenyl-4'-hydroxyphenyl benzophenone and acryloyl chloride as raw materials via an acylation reaction. The Uv-vis absorption spectra was applied to study the absorption, degra-dation and migration performance of FBP. The real-time infrared spectroscopy (RT-IR) was used to investigate the photopolymerization kinetics of FBPAc. The results showed that the maximum absorption peak of FBPAc was 256. 2 nm and gave a little red shift as compared with BP(251.0 nm). Moreover, the relative migration rate of FBPAc was only 15% of BP.

Key words: photoinitiation, photoinitiator containing fluorine, polymeric, low migration