涂料工业 ›› 2010, Vol. 40 ›› Issue (6): 61-64.

• • 上一篇    下一篇

水性不饱和聚酯腻子的研究

王玉雷,陈炳耀,张意田,陈杰新   

  1. 1. 广东三和化工科技有限公司,广东佛山 528429;2. 佛山市顺德区海明思化工实业有限公司,广东佛山 528325
  • 出版日期:2010-06-01 发布日期:2019-05-15
  • 作者简介:王玉雷(1984—),男,助理工程师,主要从事油性涂料,气雾漆及汽车护理产品的研究。

A Study on Water Based Unsaturated Polyester Putty

Wang Yulei1, Chen Bingyao1, Zhang Yitian1, Chen Jiexin2   

  1. 1. Guangdong Sanwo Chemical Industry Technology Co., Ltd., Foshan Guangdong 528429, China; 2. Foshan Shunde Himensi chemical Industrial Co., Ltd., Foshan Guangdong 528325, China
  • Online:2010-06-01 Published:2019-05-15

摘要: 以含水不饱和聚酯树脂为基料,配合去离子水、促进剂、润湿分散剂、抗收缩剂、触变剂、填料等研制出水性不饱和聚酯腻子。研究了含水不饱和聚酯树脂、去离子水以及助剂配比对水性不饱和聚酯腻子性能的影响,并确定了制备水性不饱和聚酯腻子的基本条件。

关键词: 原子灰, 含水不饱和聚酯树脂, 水性不饱和聚酯腻子

Abstract: The water-based unsaturated polyester putty was prepared by use of hydrated unsaturated polyester resin as binder and mixed with deionized water, accelerant, dispersant, antishrinking agent, thixotropic agent, and fillers, etc. The influence of the hydrated unsaturated polyester resin, deionized water and additives on the performance of the environmental water-based unsaturated polyester putty was studied, and the basic requirements for preparation of water-based unsaturated polyester putty was summerized, and some questions which need a further research were proposed.

Key words: putty, hydrated unsaturated polyester resin, water-based unsaturated polyester putty