摘要: 通过物理共混工艺,利用环氧树脂对纯丙乳液进行改性。经单因素实验,确定了环氧树脂的最佳加入量,制得了水分散性乳液。以此改性乳液为基料,空心玻璃微珠为功能填料,辅以其他颜填料及助剂,制备了反射率达82%,导热系数为0.06 W/(m.K)的反射隔热水性涂料,并对其基本性能进行了测试。
关键词:
环氧树脂,
共混改性,
纯丙乳液,
空心玻璃微珠,
反射隔热涂料
Abstract: Pure acrylic emulsion was modified through physical blending process. By single-factor test the optimum dosage of epoxy resin was determined, and waterborne emulsion was prepared. Using this modified emulsion as film-forming material, hollow glass beads as function filler, and other fillers and additives, a new kind of water-based heat reflective coating was obtained, with a high reflectivity 82%, low thermal conductivity 0.06 W/(m. K). The properties of this coating was tested.
Key words:
epoxy resin,
blending modification,
pure acrylic emulsion,
hollow glass beads,
reflective heat
Insulation coating
李建涛, 蔡会武, 王瑾璐, 江照洋, 崔凤敏. 环氧改性纯丙乳液反射隔热涂料的研制[J]. 涂料工业, 2009, 39(10): 46-48.
Li Jiantao, Cai Huiwu, Wang Jinlu, Jiang Zhaoyang, Cui Fengmin. Preparation and Performance of Epoxy Modified Acrylic Emulsion Based Reflective and Heat Insulation Coating[J]. Paint & Coatings Industry, 2009, 39(10): 46-48.