[an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive] [an error occurred while processing this directive]涂料工业 ›› 2024, Vol. 54 ›› Issue (3): 2-7. doi: 10.12020/j.issn.0253-4312.2023-409
• 探索开发 • 下一篇
贾 昊 1,孙 军 1,张晓莲 2,王军军 2,谷晓昱 1,张
胜*1
Jia Hao1,Sun Jun1,Zhang Xiaolian2,Wang Junjun2,Gu Xiaoyu1,Zhang Sheng1
摘要: 为提高木材防火性能,采用六氯环三磷腈(HCCP)和三(2-羟乙基)异氰尿酸酯(THEIC)合成了新型磷腈枝化物(HT),HT 与异氰酸酯基丙基三乙氧基硅烷(IPTS)制备了木材防火涂层。研究了涂层的透明性、热稳定性、硬度和防火性能。结果表明:涂层高度透明,铅笔硬度达 3H,极限氧指数提高 30%,垂直燃烧 UL-94 测试达 V-0 等级。锥形量热结果表明,与纯木材相比,涂层处理后的木材的最大热释放速率和总热释放量分别降低了 25. 5% 和 53. 2%,同时涂层可以使生成的炭层更加致密、完整,可有效阻隔热量与可燃气体,使木材的防火性能得到提高。
关键词: 磷腈支化物, 防火涂层, 木材, 透明性, 防火性
Abstract: In order to improve the fire resistance of wood,a novel phosphonitrile branched flame retardant(HT) was synthesized by using hexachlorocyclophosphazene(HCCP) and tris (2-hydroxyethyl) isocyanurate(THEIC),and a wood fire retardant coating was prepared by HT and isocyanatopropyltriethoxysilane(IPTS)。The transparency,thermal stability,hardness and flame retardancy of the coating were investigated. The results showed that the coating was highly transparent,the pencil hardness reached 3H,the oxygen index increased by 30%,and the vertical combustion UL-94 test reached V-0 level. The results of cone calorimetry showed that the maximum heat release rate and total heat release of the coating-treated wood were reduced by 25. 5% and 53. 2%,respectively,compared with pure wood. Meanwhile,the coating could make the generated char denser and more intact,and it could effectively block heat and combustible gases,so the fire resistance of the wood can be improved.
Key words: phosphonitrile branched flame retardant, fire retardant coating, wood, transparency, fire resistance
中图分类号: