Paint & Coatings Industry ›› 2015, Vol. 45 ›› Issue (6): 7-10.

Previous Articles     Next Articles

Synthesis and Surface Performance of Acrylate Modified Silicone Levelling Agent for Coatings and Inks

LvZhengwei1, Meng Tingting1, Jiang Jinmei1, Chen Yongkang2, Ji Yongxin1   

  1. 1. College of Chemical Engineering Naning Forestry University, Nanjing 210037, China; 2. Anhui Xoanons Chemical Co., Ltd., Chizhou Anhui 247260, China
  • Online:2015-06-01 Published:2019-05-31

丙烯酸酯改性有机硅流平剂的合成及其流平性能的研究

吕正伟,孟婷婷,姜金梅,陈永康,季永新   

  1. 1. 南京林业大学化学工程学院1,南京 210037;2. 安徽嘉智信诺化工股份有限公司, 安徽池州 247260
  • 基金资助:
    江苏高校优势学科建设工程资助项目;校企合作项目(028030003)

Abstract: An acrylate modified silicone levelling agent was synthesized through the hydrosilylation reaction. The synthesis condition of acrylate modified silicone was studied.The structure of the product was characterized by Fourier transform infrared spectroscopy(FT-IR) and 1-NMR. Meanwhile, the surface performance of different acrylate modified silicone was discussed. The result showed that the appropriate reaction conditions were as follows: the reac-tion time was 7 h, the reaction temperature was 100 C, the amount of catalyst was 20 ug/g, the ratio of reactants [n( Si-H):n(C=C) was 1: 1. 2. Under these conditions, the conversion of Si-H in silicone oil was 92. 50% The self-prepared levelling agent could effectively reduce the surface tension of acrylic varnish and allowed its film to show excellent levelling performance such as DOl, gloss and smooth degree.

Key words: hydrosily lation, acrylate modified silicone, levelling agent, surface performance

摘要: 通过硅氢加成反应合成了丙烯酸酯改性有机硅流平剂,研究了合成反应条件,利用红外光谱(FT-IR)及核磁共振氢谱(1H-NMR)对制得的产物进行了结构表征,探讨了不同丙酸酯制得的改性有机硅流平剂的表面性能。 结果表明:适宜的合成条件为反应时间为 7H,反应温度为 100 ℃ ,催化剂用量为 20 μg/g,反应物比例为n(Si-H) ∶ n(C=C)= 1:1.2。 在此条件下,含氢硅油中Si-H的转化率达 92.5%。 表面性能研究表明:自制的丙烯酸酯改性有机硅流平剂产品能有效降低丙烯酸清漆的表面张力,同时其涂膜具有较好的鲜映性、光泽及滑爽度等表面流平性能。

关键词: 硅氢加成, 丙烯酸酯改性有机硅, 流平剂, 表面性能