Paint & Coatings Industry ›› 2009, Vol. 39 ›› Issue (4): 26-27.

Previous Articles     Next Articles

Development and Application of Novel Epoxy Putty

Jin Jiahong1, Zhang Xiugin1, Yang Yongbing1, Lu Zhefang2,wang suqin2   

  1. 1.changzhou high Technology Research Institute of Nanjing University, Changzhou, Jiangsu 213000, China;2.changzhou tianan special coating co.ltd,changzhou,jiangsu 21300,china
  • Online:2009-04-01 Published:2019-05-31

新型环氧胶泥的研制

金加洪1,张秀芹1,杨永兵1,陆振方2,王素琴2   

  1. 1、常州南京大学高新技术研究院,江苏常州 213000;2、常州市天安特种涂料有限公司,江苏常州 213000
  • 作者简介:金加洪(1974—),男,工程师,从事有机功能材料、特种涂料等研究。

Abstract: A novel epoxy putty was prepared through polyurethane modified epoxy resin and mixed a-mines. It was found that the putty, besides its usual good corrosion resistance, chemical resistance and adhe-sion, has good tensile performance, the yield elongation was over 8%.

Key words: modified epoxy resin, epoxy putty, yield elongation, pull off adhesion, tensile strength

摘要: 以多异氰酸酯改性的环氧树脂与混合胺制备了新型环氧胶泥,此胶泥既具有常规环氧胶泥的防腐性、耐 化学品性以及优异的附着力,又具有厚填充时良好的拉伸性能,扯断伸长率达到 8%以上。

关键词: 改性环氧树脂 , 环氧胶泥 , 扯断伸长率 , 拉开法附着力 , 拉伸强度