摘要： 利用 2 种软硬程度不同的UV 固化水性树脂，对 UV 固化水性木器涂料的复配及工艺进行研究。 探讨了助剂（特别是硅溶胶）对水性木器涂料涂膜性能及施工工艺性等的影响。 实验结果表明：UV 固化水性木器清漆涂膜硬度高，具有很好的附着性、耐刮擦、耐化学品等性能，适合于工业化生产板材的涂饰。
关键词:
UV 固化,
水性木器涂料,
聚氨酯丙烯酸酯
Abstract: Using two kinds of synthetic UV curable waterbome resin, which were different in chain hardness a research on blending and process of UV curable waterborne wood coatings were conducted. The influence of additives, especially the silica sol, on film performance and application technology of waterborne wood coatings was discussed. The experimental results showed that the UV curable waterborne wood lacquer could provide good adhesion, scratch resistance, hardness, chemical resistance, suitable for painting on industrial scale production of wood board.
Key words:
UV-curable,
waterborne wood coatings,
polyurethane acrylate
刘 楠, 梁 亮, 罗思远, 黄志辉, 郭 婧. uv 固化水性聚氨酯丙烯酸酯木器涂料的研究[J]. 涂料工业, 2013, 43(8): 60-64.
Liu Nan, Liang Liang, Luo Siyuan, Huang Zhihui, Guo Jing. Study on UV-Curable Waterborne Polyurethane Acrylate Wood Coatings[J]. Paint & Coatings Industry, 2013, 43(8): 60-64.