涂料工业 ›› 2009, Vol. 39 ›› Issue (8): 4-7.

• • 上一篇    下一篇

硬脂酸基铝 -锆偶联剂的合成及对长余辉发光颜料的改性

郭 斌,王 燕,高 勇,乙福翠,戴 荧,王洪跃   

  1. 1. 南京林业大学理学院化学与材料系,南京 210037;2. 江苏省产品质量监督检验研究院 国家工程复合材料质量监督检验中心,南京 210007;3. 福建师范大学化学与材料学院,福州 350007
  • 出版日期:2009-08-01 发布日期:2019-05-14
  • 作者简介:郭斌(1975-),男,博士,副教授,研究方向为光电功能高分子、光学功能涂料。
  • 基金资助:
    2006年度江苏省“青蓝工程”优秀青年骨干教师项目,江苏省高校自然科学研究计划(08KJB430008),南京大学固体微结构物理国家重点实验室开放课题(M05003)资助。

Synthesis of Stearic Acid Based Al-Zr Coupling Agent and Modification for Long Afterglow Luminous Pigments

Guo Bin1,Wang Yan2, Gao Yong3, Yi Fucui1,Dai Ying1,Wang Hongyue1   

  1. 1. College of Science, Nanjing Forestry University, Nanjing 210037, China; 2. Jiangsu Provincial Superising Testing Research Institute for Products Ouality, Nanjing 210007, China; 3. College of Chemistry and Materiales Science,Fujian Normal University,Fuzhou 350007,China
  • Online:2009-08-01 Published:2019-05-14

摘要: 合成了以硬脂酸 (十八碳烷酸)为有机功能配位体的新型铝 -锆偶联剂,并对长余辉发光颜料(SrMgAl4O8:Eu 2+ ,Dy 3+ )进行了表面改性。通过水解 pH值、电导率、ATR-FTIR、SEM、接触角和余辉衰减曲线分别表征了改性前后样品的变化。结果表明,采用12%添加量改性的样品与有机树脂体系的接触角最小可达 41°,相容性提高显著,改性效果最佳;同时,耐水性亦有提高,改性后对发光性能影响不大。

关键词: 硬脂酸, 铝 -锆偶联剂, 长余辉发光颜料, 表面改性

Abstract: A stearic acid based Al-Zr CA(coupling agent )was synthesized, and applied to modify the pigment (SrMgAl4O8:Eu 2+ ,Dy 3+). The pl value, electric conduetwiy, ATR long afterglow luminous FTIR. SEM, contact angle and afterglow decay curve were used to characterize the pigment before uminous lat the best property of water resistance and compatibility with or and after modification. Results showed that the best property of water resistance and compatibility with organic resin system can be obtained when the CA was added at 12%, and luminance intensity decay curves showed that their luminous property didnt change significantly.

Key words: stearic acid, Al-Zr coupling agent, luminous pigment, surface, modification