Research & Development

Preparation and Properties of Composite Epoxy Coating Doped with Nano-Al2O3 and Modified Phytic Acid

  • YU G ,
  • ZHANG P L ,
  • QIAN H B ,
  • et al
Expand
  • 1. Shaoxing University,Shaoxing,Zhejiang 312000,China;

    2. Shaoxing Changmu New Material Technology Co., Ltd., Shaoxing,Zhejiang 312072,China;

    3. Jiangnan University,Wuxi,Jiangsu 214122,China

Online published: 2025-02-01

Abstract

To enhance the anticorrosive resistance of epoxy resin coating and endow themwith self-healing property,a novel composite epoxy resin coating was prepared by graftingphytic acid onto ethylene glycol diglycidyl ether catalyzed by tetrabutylammonium bromideand doped with nano-Al2O3 mixed into epoxy resin. The influence of the mass fraction of nano-Al2O3 on the anticorrosive resistance of the coating was investigated,along with tests on its surface morphology,gloss,mechanical properties,self-healing ability,and anticorrosive resistance. The results showed that the addition of modified phytic acid and nano-Al2O3 significantly improved the surface smoothness,gloss and hardness of the epoxy coating. Whenthe content of modified phytic acid was controlled at 5% and the nano-Al2O3 content reached 5%,the composite coating exhibited a hardness of H,the self-corrosion current density reached 7. 85×10-8 A/cm2,and the corrosion potential was -0. 805 V. In addition,the composite coating demonstrated excellent self-healing properties. The introduction of modifiedphytic acid and nano-Al2O3 significantly enhanced the anticorrosive resistance,self-healing ability,and durability of the epoxy resin coating.

Cite this article

YU G , ZHANG P L , QIAN H B , et al . Preparation and Properties of Composite Epoxy Coating Doped with Nano-Al2O3 and Modified Phytic Acid[J]. Paint & Coatings Industry, 2025 , 55(2) : 1 -6 . DOI: 10.12020/j.issn.0253-4312.2024-252

Outlines

/