With the increasing demand on environmental protection in China recently years， the replacement of the solvent-based coatings by waterborne coatings applied in construction machinery is imperative. In this article， the performance index of waterborne coatings， coating process of construction machine， typical coating defects and solutions thereto， reformation of waterborne coating production line and its wastewater treatment， etc. are discussed. The results show that the performance of waterborne coating is not inferior to the solvent-based coating. The construction efficiency is desirable if the construction conditions and reformation of the production lines are suitable. In addition， the selection of suitable paint spray flocculant can effectively separate the lacquer slag and enable the treated wastewater to be recycled.
WU Ling
,
XU Jie
. Application of Waterborne Coatings in Construction Machinery[J]. Paint & Coatings Industry, 2019
, 49(1)
: 67
-73
.
DOI: 10.12020/j.issn.0253-4312.2019.1.67
[1]黄伟，邱祖民，肖建军，等.工程机械涂装水性化研究与应用[J].化工新型材料, 2015, 43(8):210-212
[2]王福才，夏天渊，张景斌，等.新型水性工艺在汽车涂装中可行性研究[J].涂料工业, 2016, 46(12):74-79
[3]徐杰，顾广新，刘薇薇，等.工程机械用超高固体分涂料喷涂工艺的研究[J].涂料技术与文摘, 2016, 37(7):28-32
[4]陈铤， 施雪珍， 顾国芳.双组份水性环氧树脂涂料[J].高分子通报, 2002, 12(6):63-70
[5]张竟， 黄培.环氧树脂固化动力学研究进展[J].材料导报, 2009, 7(23):58-61
[6]依成武，依蓉婕，李洋，等.涂装废水处理技术研究[J].高压电技术, 2016, 42(2):337-348
