采用改进的Hummers方法制得氧化石墨烯（GO），利用硅烷偶联剂（APTMS）改性氧化石
墨烯后，再经L-抗坏血酸（L-AA）还原得到氨基化还原氧化石墨烯（KRGO），并与碳纳米管（CNT）作为
协同改性剂，与水性聚氨酯（WPU）预聚体复合得到KRGO-CNT/WPU复合物，以期改善WPU涂膜的力
学性能、热稳定性和耐水性。采用FT-IR、XRD、TEM、SEM和TG等测试手段对复合物的结构和性能
进行表征。结果表明：APTMS成功地插入了GO片层，明显地改善了复合材料的力学性能、疏水性与
热性能。当KRGO-CNT 的质量分数为0.5%时，涂膜拉伸强度从纯WPU的14.10 MPa增大到35.49
MPa，增幅达152%；KRGO-CNT/WPU 涂膜质量损失为5%时的温度（T5%）比纯WPU 高29.3 ℃；当
KRGO-CNT的质量分数为0.8%时，涂膜静态水接触角从纯WPU的54.7°增大到82.8°。
A graphene oxide (GO) was prepared by the modified Hummers method.Then an aminated reduced graphene oxide (KRGO) was obtained by GO modified with silane coupling agent (APTMS) followed by reduction with L-ascorbic acid (L-AA). The prepared KRGO was mixed with carbon nanotubes (CNT) as synergistic modifier, and then was combined with waterborne polyurethane (WPU) to get KRGO- CNT/WPU composites, by which the mechanical properties, poor thermal stability and water resistance, etc. of WPU were improved. The structure and properties of the composites were characterized by FT-IR,TEM,SEM,XRD and TG. The results showed that APTMS successfully interlaid the GO sheet and significantly improved the mechanical properties, hydrophobic and thermal properies of the composites. When the mass ratio of KRGO-CNT was 0.5%, the tensile strength of KRGO-CNT/WPU composites increased from 14.10 MPa to 35.49 MPa, showing 152% higher than that of pure WPU. In addtion, the temperature of KRGO-CNT/WPU at the thermal weight loss of 5% was 29.3 ℃ higher than that of the pure WPU. When the mass ratio of KRGO-CNT was 0.8%, the static water contact angle increased from 54.7° to 82.8°.
[1]LEI L, XIA Z, ZHANG L, et al. Preparation and properties of amino- functional reduced graphene oxidewater?borne polyurethane hybrid emulsions[J].[J].Progress in Organic Coatings, 2016, 97:19-27
[2]YONG Q W, NIAN F W, LIAO B, et al.Synthesis and characterization of solvent- free waterborne polyurethane dispersion with both sulfonic and carboxylic hydrophilic chain-extending agents for matt coatings application[J].RSC Advances, 2015, 5(130):107413-107420
[3]LI Y, PAN D, CHEN S, et al.In situ polymerization and mechanical,thermal properties of polyurethanegraphene oxideepoxy nanocomposites[J].Materials & Design, 2013, 47(9):850-856
[4]KHAN U, BLIGHE F M, COLEMAN J N.Selective mechanical reinforcement of thermoplastic polyurethane by targeted insertion of functionalized SWCNTs[J].Journal of Physical Chemistry C, 2010, 114(26):11401-11408
[5]YANG S Y, LIN W N, HUANG Y L, et al.Synergetic effects of graphene platelets and carbon nanotubes on the mechanical and thermal properties of epoxy composites[J].Carbon, 2011, 49(3):793-803
[6]WU J K, YE C C, LIU T, et al. Synergistic effects of CNT and GO on enhancing mechanical properties and separation performance of polyelectrolyte complex membranes[J].[J].Materials & Design, 2017, 119:38-46
[7]ZHANG W B, ZHANG Z X, YANG J H, et al. Largely enhanced thermal conductivity of polycarbon nanotube composites achieved by adding graphene oxide[J].[J].Carbon, 2015, 90:242-254
[8]欧忠星，郑玉婴，肖东升，等.功能化改性还原氧化石墨烯-碳纳米管热塑性聚氨酯复合材料膜的制备及性能[J].复合材料学报, 2016, 33(3):486-494
[9]王武生.聚氨酯分散体粒径及粒径分布与粒径控制[J].涂料技术与文摘, 2011, 32(2):3-13
[10]LI Y, GAO F, XUE Z, et al. Synergistic effect of different graphene-CNT heterostructures on mechanical and selfhealing properties of thermoplastic polyurethane composites[J].[J].Materials & Design, 2018, 137:438-445
[11]LUO X, ZHANG P, REN J, et al.Preparation and properties of functionalized graphene/waterborne polyurethane composites with highly hydrophobic［J］. Journal of Applied Polymer Science, 2015, 132(23).
[12]张玉，杨建军，吴庆云，等.硅烷化还原氧化石墨烯水性聚氨酯复合物的合成与性能[J].精细化工, 2016, 33(3):241-246
