涂料工业 ›› 2012, Vol. 42 ›› Issue (7): 1-5.

• 探索开发 •    下一篇

聚合方法对水性羧基丙烯酸树脂及相应2K-WPU性能的影响

许 飞1,张小利2,胡 中1,陈卫东1,庄振宇1,张汉青1,朱 柯1,祝宝英1   

  1. 1. 中海油常州涂料化工研究院,江苏常州213016;2. 芜湖欧宝机电有限公司,安徽芜湖241000
  • 出版日期:2012-07-01 发布日期:2019-05-31
  • 作者简介:许飞(1985- ),男,硕士,主要从事水性树脂及涂料产品开发与研究

Effect of Synthetic Process on Properties of Waterborne Hydroxyl Acrylic Resin and the Corresponding 2K-WPU

Xu Fei1, Zhang Xiaoli2, Hu Zhong1,Chen Weidong1,Zhuang Zhenyu1, Zhu Ke1, Zhu Baoying1   

  1. 1. CNOOC Changzhou Paint and Coatings Industry Research Institute, Changzhou, Jiangsu 213016, China; 2. Wuhu Abaur Mechanical Electrical Co., Ltd., Wuhu, Anhui 241000, China
  • Online:2012-07-01 Published:2019-05-31

摘要: 分别通过溶液聚合、乳液聚合和两步聚合法制备了3种水性羟基丙烯酸树脂(PAS、PAE、PAT),采用傅里叶变换红外光谱(FT-IR)、动态光散射(DLS)和示差扫描量热法(DSC)对所合成树脂进行了表征。在无催化剂存在的条件下,分别将3种水性树脂与异氰酸酯固化剂Bayhydur XP 2655以及助剂混合得到双组分水性聚氨酯清漆,通过红外光谱对固化后清漆结构进行了表征,并对3种水性清漆的性能进行了研究。实验结果表明基于PAT的水性清漆综合性能较优。

关键词: 双组分水性聚氨酯, 水性羟基丙烯酸树脂, 聚合方法

Abstract: Three kinds of waterborne hydroxyl acrylic resin(PAS, PAE and PAT)were prepared through solution polymerization, emulsion polymerization and two -step polymerization method respectively. The structures of resins were characterized by fourier transfer infrared(FT-IR), dynamic light scattering(DLS) and differential scanning calorimeter(DSC). The hydroxyl acrylic resins were mixed with hydrophilically modified polyisocyanate curing agent (Bayhydur XP 2655) respectively in the absence of catalyst to obtain a 2K waterborne polyurethane(2K-WPU) coatings. FT-IR was employed to investigate the structure of the cured coatings. Comparisons of properties of 2K -WPU coatings based on these three different resins were conducted which showed that the PAT -based coating gave better comprehensive properties.

Key words: 2K-WPU, waterborne hydroxyl acrylic resin, polymerization method