【目的】通过石墨烯与环氧树脂的复合来改善纯环氧涂层耐腐蚀性能较差且摩擦系数高的缺陷，实现铜合金表面涂层耐腐蚀耐磨性协同功能一体化。【方法】石墨烯被用作填料分散到无溶剂型环氧涂料中，探讨了石墨烯含量对铜合金表面环氧涂层耐腐蚀性和耐磨性的影响。【结果】石墨烯 /环氧复合涂层的腐蚀电流密度明显低于纯环氧涂层。同时，相较于纯环氧涂层，石墨烯 /环氧复合涂层的摩擦系数与磨损率可分别降低 50%和 91. 6%。【结论】石墨烯 /环氧复合涂层可显著改善铜基摩擦副的耐腐蚀性及耐磨性，并且适当的石墨烯含量可实现涂层协同耐腐蚀 /耐磨增强效应。

［Objective］By incorporating into epoxy resin，the poor corrosion resistance and high friction coefficient in pure epoxy coating were addressed，achieving a synergistic enhancement of bothcorrosion and wear resistance of the coating on copper alloy surface.［Methods］ Graphene wasdispersed as a filler in solvent-free epoxy coatings. The effect of graphene content on the corrosion andwear resistance of epoxy coating applied to the copper alloy substrates was then investigated.［Results］ The self-corrosion current density of the graphene/epoxy composite coating was significantly lower thanthat of the pure epoxy coating. Meanwhile，compared with the pure epoxy coating，the friction coefficient and wear rate of the graphene/epoxy composite coating were reduced by 50% and 91. 6%，respectively.［Conclusion］ The Graphene/epoxy composite coating could significantly improve the corrosion resistance and wear resistance of coated copper based friction pairs，and appropriate graphene contentcould achieve the synergistic enhancement effect of corrosion resistance and wear resistance of thecoating.