引入三官能度环氧端基的异氰脲酸三缩水甘油酯（ TGIC）改性水性聚酯树脂，利用羧基与环氧基开环反应生成酯键和羟基并进一步反应得到六元支化岛状结构水性聚酯树脂。通过红外光谱、 X射线衍射和凝胶色谱对异氰脲酸三缩水甘油酯（ TGIC）改性水性聚酯树脂进行微观结构的分析，对比了异氰脲酸三缩水甘油酯、季戊四醇和三羟甲基丙烷作为支化组分对水性聚酯树脂贮存稳定性、 T弯、耐热性能、耐水煮性能、耐溶剂性能等的影响，发现异氰脲酸三缩水甘油酯（ TGIC）改性水性聚酯树脂具有更好的 T弯与耐热性，其他性能包括耐溶剂擦拭性、耐水煮性以及耐化性等与使用其他脂肪族支化单体的水性聚酯相当。
This article has described a waterborne polyester resin modified by triglycidyl isocyanurate（ TGIC）with three end-epoxy groups.The carboxyl groups were reacted withepoxy groups to form ester bond and hydroxyl groups and further reaction leading to a 6-branched island structure waterborne polyester resin.The microstructure of the TGIC modifiedwaterborne polyester was analyzed by FT-IR，X-ray diffraction（XRD）and Gel Permeation Chromatography（GPC）. The effects of TGIC，pentaerythritol and trimethylolpropane，as the branching components，on the storage stability，T-bend，heat resistance，boiling-water resistance，solvent resistance of the waterborne polyester，were compared.The results showedthat the waterborne polyester resin modified by TGIC provided better T-bend and heatresistance，as well as the solvent scrubbing resistance，boiling-water resistance and chemical resistance，which were comparable to the waterborne polyester produced with other aliphaticbranching monomers.
[1]程万里，涂伟萍.水性聚酯的合成及性能研究进展[J].热固性树脂, 2009, 24(2):56-59
[2]刘身凯.聚酯水性化技术及水性聚酯稳定性研究进展[J].化工进展, 2009, 28(8):1376-1381
[3]王纲.聚酯水分散体的合成研究[J].中国涂料, 2004, 19(10):10-13
[4]张笑瑞.聚酯结构对水溶性硅钢片漆性能的影响[J].绝缘材料, 2014, 47(5):23-26
[5]周春利.卷材涂料 弯杯突性能影响因素研究[J].涂料技术与文摘, 2014, 125(9):19-22
[6] 闫福安 .水性树脂与水性涂料 [M].北京：化学工业出版社， 2009：89-90.
[7]王承伟.水性聚酯卷材涂料的研制与开发[J].上海涂料, 2009, 47(2):5-6
[8] 张俊 .聚酯粉末涂料用固化剂的选择 [J] .涂料工业，2003，33（12）14-16.
