采用聚天门冬氨酸酯树脂、助剂、绝缘导热填料、阻燃剂、憎水剂及颜料等制备了无溶剂绝缘防腐防水涂料 A组分，与脂肪族异氰酸酯 NX-100固化剂 B组分以质量比 4∶1配合制备了无溶剂绝缘防腐防水涂料。通过对树脂、阻燃剂、消泡剂、导热填料和憎水剂的筛选，该涂料可快速固化，绝缘性、导热性能优良，阻燃效果好，憎水性及防腐效果持久，机械性能优异，符合绿色环保涂料要求，满足在电力工业中的使用要求。
The part A of solvent-free insulating waterproof coatings was prepared by using polyaspartic acid ester resin，additives，insulating thermal conductive fillers，flame retardants，water repellents and pigments，which was mixed with part B of aliphatic isocyanate NX-100 curing agent at a mass ratio of 4∶1. Through careful screening of resins，flame retardants，defoamers，thermal conductive fillers and hydrophobic agents，the coatings showed the advantages of fast curing，good insulation and thermal conductivity，good flame retardant effect，durable hydrophobic and anticorrosive performance，excellent mechanical properties，meeting the requirements of green environmental friendly coatings and the application requirements in the power industry.It is worth to be applied widely.
[1] 黄文润 .热硫化硅橡胶 [M].成都：四川科学技术出版社， 2009：219-221.
[2]张余英.超长寿命聚天门冬氨酸酯重防腐涂料的研制[J].中国涂料, 2012, 27(5):54-57
[3]周宏霞，王明明.BNAl2O3环氧树脂导热复合材料的制备与性能[J].粘接, 2012, (11):52-55
[4]WANG Y，QIAO X，WAN J，et al.Preparation of ALN microspheresUHMWPE composites for insulating thermalconductors[J].RSC Advances, 2016, 6(83):80262-80267
[5]刘闻凤，翟晶，王刘彬，等.有机硅树脂基导热复合材料的制备与导热性能研究[J].化工新型材料, 2015, 43(9):143-146
[6]LEE J，JUNG H，YU S，et al.Boron nitride nanosheets(bnnss)chemically modified by“grafting-from”polymerization of poly(caprolactone) for thermally conductive polymercomposites[J].Chemistry-An Asian Journal, 2016, 11(13):1921-1928
[7]LIF，WU C，QIAN R，et al.Nano-micro structure of functionalized boron nitride and aluminum oxide for epoxycomposites with enhanced thermal conductivity and breakdown strength[J].RSC Advances, 2014, 4(40):21010-21012
[8]周文英，李勤，齐暑华，等.复合型散热硅橡胶研究[J].高分子材料科学与工程, 2007, 23(4):242-245
[9]江晓婷，王朝胜，江振林.耐热持久疏水涂层的制备及其性能研究[J].涂料工业, 2016, 46(7):1-6
