采用 4种不同的碱（氢氧化钾、氢氧化钠、氨水、三乙胺）皂化低相对分子质量的苯乙烯 -马来酸酐共聚物（ SMA）作为乳液聚合的乳化剂合成了丙烯酸酯乳胶，并对 4种不同碱皂化的 SMA作乳化剂合成丙烯酸酯乳胶时所需乳化剂的用量、乳胶的粒径、粒径分布、黏度、乳胶稳定性及乳胶膜的吸水率进行了研究。结果表明： 4种碱皂化 SMA作为乳化剂均可以合成丙烯酸酯乳胶，最佳用量为单体的 8%（质量分数，下同）。乳胶性能及乳胶膜的吸水率受皂化 SMA所用碱的类型的影响较大。其中， NaOH皂化 SMA作乳化剂合成的丙烯酸酯乳胶的综合性能最好，乳胶的粒径较小为 142. 4 nm，呈单分散，黏度为 14. 68 mPa·s，综合稳定性良好，乳胶膜吸水率较低，为 9. 52%。
Acrylate latex was synthesized using the low molecular weight styrene-maleic anhydride（SMA）copolymer saponified by use of the bases of KOH，NaOH，NH3·H2O and TEA. The amount of the saponified SMA copolymers emulsifier used in emulsion polymerization， the particle size，particle size distribution，viscosity and stability of latex and the water absorption of latex film were investigated. It was shown that all of the above mentioned alkali saponified SMA copolymer could be used as emulsifier to synthesize acrylate latex and the best dosage was 8% of the monomers. The property and the water absorption of latex film were significantly influenced by the alkali used in the saponification reaction of SMA copolymer.The comprehensive properties of acrylate latex，prepared by using the SAM copolymers saponified via NaOH as emulsifier，was the best among them，the particle size of the latex was as small as 142 nm and monodisperse，its viscosity was 14. 68 mPa·s with excellent stability， the water absorbability of latex film was as low as 9. 52%.
[1]SHENYZ，ZHAO C，ZHOU J M.et alApplication ofwaterborne acrylic emulsions in coated controlled releasefertilizer using reacted layer technology[J].Chinese Journal ofChemicalEngineering, 2015, 23(1):309-314
[2]JANKAUSKAIT.V，GULBINIENA，JIYEMBETOVA I，et al. Comparable evaluation of leather waterproofing behaviourupon hide quality. II. influence of finishing on leatherproperties[J].Materials Science, 2014, 20(2):165-170
[3]BONNEFOND A，MATEJ M，PAULIS M，et al.Morphologyand properties of waterborne adhesives made from hybridpolyacrylicmontmorillonite clay colloidal dispersions showingimproved tack and shear resistance[J].Colloid & PolymerScience, 2013, 291(1):167-180
[4]吴跃焕，赵建青，暴志菊.丙烯酸酯乳液的成膜性能[J].绿色建筑, 2008, 24(3):17-21
[5]鲁德平，熊传溪 .高分子乳化剂在丙烯酸酯乳液共聚物中的应用 [J].高分子材料科学与工程， 2000，16（2）.
[6]巫辉，孙大伟，吴伟卿，等.反应性乳化剂及其在乳液聚合中的应用研究进展[J].中国胶粘剂, 2006, (4):49-52
[7]张莉，陈桐，尹松.无皂乳液聚合制备方法的研究进展[J].化学与粘合, 2008, 30(3):50-53
[8]郭天瑛，宋谋道，郝广杰，等.无皂乳液聚合稳定化研究进展[J].石油化工, 2001, 30(1):69-71
[9]XUGL，DENG L L，WEN X F，et al.Synthesis andcharacterization of fluorine-containing poly-styrene-acrylatelatex with core-shell structure using a reactive surfactant[J].Journal of Coatings Technology and Research, 2011, 8(3):401-407
[10]王建广，褚书逵，文治天，等.苯乙烯 -马来酸酐共聚物的合成研究进展[J].淮海工学院学报, 2015, (24):53-58
[11]CHEN G F，ZHANG Y，ZHOU X，et al.Synthesis ofstyrene-maleic anhydride copolymer esters and their surfaceenriched properties when blending with polyethylene[J].Applied Surface Science, 2006, 253(3):1107-1110
[12]SUJF，SCHLANGEN E. Synthesis and physicochemicalproperties of high compact microcapsules containing rejuvenator applied in asphalt[J].[J].Chemical Engineering Journal, 2012, 198-199:289-300
[13]康永.界面聚合法聚氨酯微胶囊相变材料性能研究[J].橡塑技术与装备, 2019, 45(6):31-38
[14]吴英，江雨，刘廷国，等.苯乙烯 -马来酸酐共聚物在甲基丙烯酸甲酯乳液聚合中的应用[J].池州学院学报, 2018, 32(3):53-55
[15]沈荣，鲍世轩，郭蓓，等.不同溶剂中的苯乙烯 -马来酸酐共聚研究[J].武汉工程大学学报, 2019, 41(1):65-68
[16]石雪龙，吴剑铭，张振山，等.绿色溶剂中苯乙烯 -马来酸酐无规共聚物的合成及表征[J].塑料科技, 2019, 47(2):29-33
[17]蒋嘉，张国寅.影响乳液黏度的因素[J].化学建材, 1989, (3):18-21
[18]燃料化学工业部涂料技术训练班组织编写 .涂料工艺 .第七分册 [M].北京：化学工业出版社， 1983.
